AT89EB5114

AT89EB5114 特性

• 80C51 Compatible
  – Two I/O Ports
  – Two 16-bit Timer/Counters
  – 256 bytes RAM
• 4 Kbytes ROM or 4 Kbytes Flash Program Memory
• 256 bytes EEPROM (Stack Die Packaging Technology on SO20 Package)
• X2 Speed Improvement Capability (6 Clocks/Machine Cycle)
• 10-bit, 6 Channels A/D Converter
  – One-channel with Progammable Gain and Rectifying Amplifier (Accuracy +/- 5%)
  – Voltage Reference for A/D External Analog
• Hardware Watchdog Timer
• Programmable I/O Mode: Standard C51, Input Only, Push-pull, Open Drain
• Asynchronous Port Reset
• Triple System Clock
  – Crystal or Ceramic Oscillator (24 MHz)
  – RC Oscillator (12 MHz), with Calibration Factor Using External R and C
  (Accuracy +/- 3.5% with Ideal R and C)
  – RC Oscillator, Low Power Consumption (12 MHz Low Accuracy)
  – Programmable Prescaler
• One PWM Unit Block With:
  – 16-bits Programmable Counter
  – 3 Independent Modules
• One PWM Unit Block with:
  – 16 bits Programmable Counter
  – 1 Module
• Interrupt Structure With:
  – 7 Interrupt Sources,
  – 4 interrupt Priority Levels
• Power Control Modes:
  – Idle Mode
  – Power-down Mode
  – Power Fail Detect, Power On Reset
  – Quiet mode for A to D Conversion
• Power Supply: 3 to 3.6V
• Temperature Range: -40 to 85o C
• Package: SO20, SO24 (upon request)

AT89EB5114 概述

The AT8xEB5114 is a high performance version of the 80C51 8-bit microcontroller in a
Low Pin Count package.
The AT8xEB5114 retains all the features of the standard 80C51 with 4 Kbytes program
memory, 256 bytes of internal RAM, a 7-source, 4-level interrupt system, an onchip
oscillator and two timers/counters. AT8xEB5114 may include a serial two wire
interface EEPROM housed together with the microcontroller die in the same package.
The AT8xEB5114 is dedicated for analog interfacing applications. For this, it has a 10-
bit, 6 channels A/D converter and two PWM units; these PWM blocks provide PWM
generation with variable frequency and pulse width.
In addition, the AT8xEB5114 has a Hardware Watchdog Timer and an X2 speed
improvement mechanism. The X2 feature allows to keep the same CPU power at a
divided by two oscillator frequency. The prescaler allows to decrease CPU and peripherals
clock frequency. The fully static design of the AT8xEB5114 allows to reduce
system power consumption by bringing the clock frequency down to any value, even
DC, without loss of data.

The AT8xEB5114 has 3 software-selectable modes of reduced activity for further reduction
in power consumption. In idle mode the CPU is frozen while the peripherals are still
operating. In quiet mode, only the A/D converter is operating. In power-down mode the
RAM is saved and all other functions are inoperative. Three oscillator sources, crystal,
precision RC and low power RC, provide versatile power management.

AT89EB5114 訂購型號

AT89EB5114 技術支持

1. AT89EB5114 數據手冊DataSheet 下載. PDF

8051 結構單片機技術支持

1. 《新聞報道》Atmel 新的單周期8051核心帶來顯著的性能提高與低能耗
2. 《技術手冊》AT/TSC8x251G2D.PDF
3. 《技術手冊》AT89C2051 .PDF
4. 《技術手冊》AT89C51ID2 Errata .PDF
5. 《技術手冊》AT89LP2052/4052 Rev. C Errata .PDF
6. 《技術手冊》AT89C51CC02, T89C51CC02.PDF
7. 《技術手冊》EMC Improvement Guidelines.PDF
8. 《技術手冊》TS83C51RC2 Reliability Qualification Report .PDF
9. 《技術手冊》External Brown-out Protection for C51 Microcontrollers with Active High Reset Input .PDF
10. 《技術手冊》C51 General Information about Bootloader and In-System Programming.PDF
11. 《技術手冊》How to Calculate the Capacitor of the Reset Input of a C51 Microcontroller .PDF
12. 《技術手冊》TS80C51RA2/TS80C51RD2/TS83C51RB2/TS83C51RC2/TS83C51RD2/TS87C51RB2/TS87C51RC2/TS87C51RD2 AT80C51RA2/A .PDF