The AT91RM9200 integrates a wide range of standard interfaces including USB 2.0 Full Speed Host and Device and Ethernet 10/100 Base-T Media Access Controller (MAC), which provides connection to a extensive range of external peripheral devices and a widely used networking layer. In addition, it provides an extensive set of peripherals that operate in accordance with several industry standards, such as those used in audio, telecom, Flash Card, infrared and Smart Card applications。

To complete the offer, the AT91RM9200 benefits from the integration of a wide range of debug features including JTAG-ICE, a dedicated UART debug channel (DBGU) and an embedded real time trace. This enables the development and debug of all applications, especially those with real-time constraints。

AT91RM9200-QU-002 產品特性

• Incorporates the ARM920T? ARM? Thumb? Processor
  – 200 MIPS at 180 MHz, Memory Management Unit
  – 16-KByte Data Cache, 16-KByte Instruction Cache, Write Buffer
  – In-circuit Emulator including Debug Communication Channel
  – Mid-level Implementation Embedded Trace Macrocell? (256-ball BGA Package
  only)
• Low Power: On VDDCORE 24.4 mA in Normal Mode, 520 μA in Standby Mode
• Additional Embedded Memories
  – 16K Bytes of SRAM and 128K Bytes of ROM
• External Bus Interface (EBI)
  – Supports SDRAM, Static Memory, Burst Flash, Glueless Connection to
  CompactFlash? and NAND Flash/SmartMedia?
• System Peripherals for Enhanced Performance:
  – Enhanced Clock Generator and Power Management Controller
  – Two On-chip Oscillators with Two PLLs
  – Very Slow Clock Operating Mode and Software Power Optimization Capabilities
  – Four Programmable External Clock Signals
  – System Timer Including Periodic Interrupt, Watchdog and Second Counter
  – Real-time Clock with Alarm Interrupt
  – Debug Unit, Two-wire UART and Support for Debug Communication Channel
  – Advanced Interrupt Controller with 8-level Priority, Individually Maskable Vectored
  Interrupt Sources, Spurious Interrupt Protected
  – Seven External Interrupt Sources and One Fast Interrupt Source
  – Four 32-bit PIO Controllers with Up to 122 Programmable I/O Lines, Input Change
  Interrupt and Open-drain Capability on Each Line
  – 20-channel Peripheral DMA Controller (PDC)
• Ethernet MAC 10/100 Base-T
  – Media Independent Interface (MII) or Reduced Media Independent Interface (RMII)
  – Integrated 28-byte FIFOs and Dedicated DMA Channels for Receive and Transmit
• USB 2.0 Full Speed (12 Mbits per second) Host Double Port
  – Dual On-chip Transceivers (Single Port Only on 208-lead PQFP Package)
  – Integrated FIFOs and Dedicated DMA Channels
• USB 2.0 Full Speed (12 Mbits per second) Device Port
  – On-chip Transceiver, 2-Kbyte Configurable Integrated FIFOs
• Multimedia Card Interface (MCI)
  – Automatic Protocol Control and Fast Automatic Data Transfers
  – MMC and SD Memory Card-compliant, Supports Up to Two SD Memory Cards
• Three Synchronous Serial Controllers (SSC)
  – Independent Clock and Frame Sync Signals for Each Receiver and Transmitter
  – I2S Analog Interface Support, Time Division Multiplex Support
  – High-speed Continuous Data Stream Capabilities with 32-bit Data Transfer
• Four Universal Synchronous/Asynchronous Receiver/Transmitters (USART)
  – Support for ISO7816 T0/T1 Smart Card
  – Hardware Handshaking
  – RS485 Support, IrDA? Up To 115 Kbps
  – Full Modem Control Lines on USART1
• Master/Slave Serial Peripheral Interface (SPI)
  – 8- to 16-bit Programmable Data Length, 4 External Peripheral Chip Selects

AT91RM9200 訂購型號

AT91RM9200-QU-002 技術支持

1. AT91R40008 數(shù)據(jù)手冊DataSheet 下載. PDF
2. ARM7TDMI 技術白皮書
3. AT91SAM 系列產品選型指南(Brochure, 2 pages, revision E, updated 2/09)
   Product selection guide to Atmel's AT91SAM microcontrollers that give immediate access to market-leading ARM processors。
4. Atmel's ARM-based Microcontroller Excels in Real-Time (White Paper, 6 pages, revision A, updated 3/01)
   Applications such as mobile communicators, PDAs, solid-state music players and internet appliances demand the best possible real-time performance. Atmel's AT91 series of ARM-based microcontrollers incorporates a number of advanced features that enhance the real-time performance of the ARM7TDMI core, making it ideal for applications of this nature。